INVISA-BEAM™ Accessories

NURSE CALL ALARM SYSTEMS

NURSE CALL CALL - With Mono or Stereo Plug

Connects monitor to the nurse-call system

Mono Nurse-call cable - The plug on the cable has one black bar

Stereo Nurse-call cable - The Plug on the cable has two black bars

 INVISA-BEAM® REMOTE ALARM WITH RECHARGEABLE BATTERY


REMOTE ALARM OPERATION

Location - Generally at the nurse-call station

Transmission Range - Approximately 70m

Audible Alarm - A Distinctive Hi-Low audible alarm alerts the carer

Visual Indicator - The red light flashes when the alarm is activated

 

 

INVISALERT® [Pager]

Audible Alarm - automatically cancels the alarm when the nurse is at the bedside and resets the monitor after leaving the bed. It has a receiving range of 70m depending on building structure

INVISALERT® Features

  • Alarm with vibrator and audible alarm

  • When alarm is activated:

    - Vibrates and sounds alarm

    - Window illuminates

    - R- room and B - bed number is displayed

    - Stores up to 99 rooms and 99 beds

  • Cannot be switched off. This ensures the resident is attended immediately.

  • Alarm can only be cancelled when the INVISALERT is at the bedside

 

 

ENTRY PASS

Entry Pass automatically turns the INVISALERT® bed monitor ON or OFF

  • Coloured side of the Entry Pass shown to the front
  • Continuously transmits a pulse signal containing its serial number
  • Flashing green LED is visible through the translucent front.
  • Flashes continuously when in use, indicating the battery is charged and operation is correct.
  • Erratic flashing indicated the Entry Pass requires charging. Battery life approx. 3-4 days before recharging
  • Working range of 1.5m approx. and a field range of 3 to 4m.

 

 

ENTRY PASS CHARGER

The Entry Pass Charger is available with either 5 or 10 charging ports.

It can be either desk or wall mounted. The charger is supplied with a 9VDC 2.5 amp regulated power supply. While the Entry Pass is in the Charger its transmiter is turned OFF.

 

 

 

CHARGING THE ENTRY PASS

  • Connect power supply to charger and power point - turn power ON
  • Power indicator on the charger glows yellow indicating power.
  • Insert the Entry Pass into matching the charging port. Do not force the Entry Pass into the Charger - it can only be inserted in one direction.
  • Charging indicator on the Entry Pass will flash red/green
  • When fully charged, the Entry Pass Will glow red.

WARNING - The Entry Pass Charger is not waterproof. Do not immerse in liquids.

Cleaning - The Entry Pass Charger may be wiped over with a damp cloth or an antiseptic wipe.

 

 




Copyright © Conseng Pty Ltd 2005. All Rights Reserved